ANTAS-172 Neutral Silicone Sealant

Model: antas-172

ANTAS-172 Neutral Silicone Sealant is a one-part, neutral-cure silicone sealant
designed for architectural glazing and general construction applications.

Features

One-component, easy to use, with good extrudability and thixotropy in the temperature range of 5 ⁰C to 45⁰C.
Neutral cure, no pollution and corrosion on metal, coated glass, concrete and other building materials.
Excellent resistance to weather, UV, ozone and water
Excellent resistance to high and low temperature, maintain good flexibility at a range of -50⁰C～150⁰C after curing.

Packaging	300mL cartridge, 24pcs/carton ；500mL sausage, 20pcs/carton
Color	Black, White, Grey, Clear, Customized with RAL Color Code
Shelf Life For Unopened Product	12 months from the manufacturing date under 30⁰C in the original unopened package. Keep in a shady and well-ventilated space.
Use	Indoor and outdoor

Applications

antas-172 is a one-part, neutral-cure architecture grade silicone sealant.

Window glazing and installation.
Interior and exterior wall sealing.
Interior general sealing.

Typical Properties

Test Method	Property	Unit	Result
ASTM C 639	Flow	mm	0
ASTM C 1183	Extrudanility	ml/min	543
	Density	g/cm³	1.53
ASTM C 679	Tack-free time	min	40
	Elastic recovery rate	%	89
ASTM D 412	Tensile strength at 100% Elongation (23⁰C)	MPa	0.62
ASTM D 412	Tensile strength at break (23⁰C)	MPa	1.36
ASTM D 412	Elongation at break	%	613
	Loss of mass	%	4
ASTM C 719	Joint movement		±25%
ASTM D 2240	Hardness	Shore A	46

Approvals & Certifications

ASTM C 920
Class 25HM
Test Report
SGBC Green Certification
VERY GOOD
Certification
SIRIM Certification in Malaysia
Certification

Compliance Statement

The stated certifications and standards relate solely to the product as supplied by the manufacturer. Product performance is dependent on correct storage, handling, surface preparation, joint design, and installation in accordance with the manufacturer’s recommendations. Actual performance may vary depending on site conditions and application methods. For project-specific requirements, please refer to the latest Technical Data Sheet (TDS) or consult our technical team prior to application.

Substrate preparation

The substrate must be clean, dry, sound and homogeneous, free from oils,grease, dust and loose or friable particles.

Limitations

1. On building materials that bleed oil, plasticized or solvent, to materials such as impregnated wood, oil-based caulks, green or partially vulcanized rubber gaskets, or tapes or bituminous below-grade waterproof and asphalt-impregnated fiberboard.
2. In totally confined spaces.
3. When substrate surface temperature is over 45 ⁰C or below -5 ⁰C during installation.
4. On wet surface or continuously immersed in water.
5. On the surface contacted with food directly.
6. For continual high pressure and temperature.
7. When the sealant is intended to be painted.
8. For structural glazing.

Technical Data SheetTDS Safety Data SheetSDS

Please provide your project details below.
Our technical team will review your request and respond within 1–2 business days.